File: lanman.txt
3Com Corporation

3Com Megahertz 10/100 LAN + 56K Modem PC Card
(3CCFEM556 PC Card family)

============================================================
This file contains setup information for Microsoft LAN Manager versions 2.0, 2.1, and 2.2.

This file includes the following topics:
 - General Information
 - DOS Installation with LAN Manager 2.2
 - SYSTEM.INI Information

============================================================
General Information
-------------------

Installation Disk 2 contains a subdirectory structure and
files that make it an OEM import disk for the LAN Manager
installer.  Use the import function of the LAN Manager
installer to capture the NDIS driver from Installation Disk
2. Be sure to save the new configuration before exiting the
installer.

NOTE: Although the driver name is FEM556N2.DOS, the
      internal driver name (used in PROTOCOL.INI) is
      FEM556$

============================================================
DOS installation with LAN Manager 2.2
-------------------------------------

The following describes the procedure for importing the
driver during installation of Lan Manager 2.2 for DOS.

 1. Begin the MS-DOS Lan Manager installation by
    inserting the MS-DOS Setup diskette and
    typing A:SETUP.

 2. After reading the Microsoft Drivers 1 diskette,
    a window is displayed showing available Network
    Adapter Drivers.  In this window choose the
    following function:

    Select Other Driver         (Alt-D)

 3. When prompted to insert your network driver
    diskette, insert Installation Disk 2.

 4. After the driver is imported from Installation Disk
    2, a box will be displayed showing the driver.  Select
    the "3Com Megahertz 10/100 LAN + 56K Modem PC Card"
    driver.

 5. Continue with the remainder of the installation
    by next selecting a protocol to use with the
    "3Com Megahertz LAN 10/100 + 56K Modem PC Card" driver.

=========================================================
SYSTEM.INI information
----------------------

In order for the modem to function correctly in MS Windows,
add the following commands to your Window's SYSTEM.INI file
under the [386Enh] category: (In case they are not there
already)

[386Enh]
 COM1Base=3F8
 COM1Irq=4
 COM2Base=2F8
 COM2Irq=3
 COM3Base=3E8
 COM3Irq=4
 COM4Base=2E8
 COM4Irq=3

(%ver lanman.txt v1.0)