CP3024
Customer Options

There are four jumper options available for configuration: *HSP, C/D, DSP and ACT. The following table shows what the jumper settings should be for various system configurations. * Note: HSP is not used. DOS Drive Type= 2


(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

J3
1 +12V
2 Ground
3 Ground
4 +5V

J5
1 +5V
2 +12V
3 Ground

CMOS Drive Parameters
Cylinders 615
Heads 4
Precomp 0
Landing Zone 615

Mounting Holes
Side: 6-32 UNC-2B .12 MAX. Insertion
Bottom: 6-32 UNC-2B .25 MAX. Insertion