CFN340A
Customer Options

The CFN340A drive is designed to operate either as a Master drive (drive C) or a Slave Drive (drive D). Commands from the host are written in parallel to both drives. When the C/D jumper on the drive is closed, the drive will assume the role of a master. When C/D is open, the drive will act as a slave. In Single-drive configurations, C/D must remain in the closed (master) position.


(The table on this page requires NETSCAPE version 1.1 or later for proper viewing.)

CMOS Drive Parameters
Cylinders 667
Heads 16
Precomp 0
Landing Zone 667

Mounting Holes
Side: 3mmx0.5mm THD(4x) 4nn Max. Insrtion
Bottum: 3mmx0.5mm THD(4x) 4nn Max. Insrtion