1.0 Introduction ===================================================================== This installation diskette contains the PCISCSI and PCISCSINR driver files for the following operating systems: DOS Windows 3.x Support via DOS drivers OS/2 2.x Windows NT Netware 3.xx and 4.xx 2.0 Revision History ===================================================================== Revision 2.0 Jun 15, 1994 Updated Drivers 3.0 File structure on Diskette ====================================================================== File Purpose ========= ================================== README This file INSTALL.EXE DOS/Windows Installation program INSTALL.HLP help file for DOS/WINDOWS installation OEMSETUP.INF Windows NT Installation File TXTSETUP.OEM Windows NT Installation File NCRSDMS.SYS Windows NT Device Driver NCRSDMS.TAG Windows NT Installation File NT Directory for Windows NT NT\README.NT Readme file for Windows NT NT\NCRSDMS.TAG Windows NT Installation File NT\OEMSETUP.INF Windows NT Installation File NT\TXTSETUP.INF Windows NT Installation File NT\NCRSDMS.SYS Windows NT Device Driver DOS Directory for DOS device drivers and install program DOS\DOSCAM.SYS DOS Device Driver DOS\CDROM.SYS DOS CD-ROM Driver DOS\MINICAM.SYS DOS Device Driver DOS\SCSIDISK.SYS DOS Device Driver DOS\ASPICAM.SYS DOS Device Driver DOS\INSTALL.EXE DOS Installation Program DOS\INSTALL.HLP DOS Installation Program Help File DOS\EMM386.SYS New EMM386 Memory Driver OS2 Directory OS/2 drivers OS2\OS2CAM.ADD OS/2 Device Driver OS2\OS2CAM.DDP OS/2 Installation File NETWARE Directory For Netware 3.xx and 4.xx device drivers NETWARE\NCRSDMS3.DSK Netware 3.xx Device Driver NETWARE\NCRSDMS3.DDI Netware 3.xx Device Driver NETWARE\ASPICAM3.NLM Netware 3.xx Device Driver NETWARE\NCRSDMS4.DSK Netware 4.xx Device Driver NETWARE\NCRSDMS4.DDI Netware 4.xx Device Driver NETWARE\ASPICAM4.NLM Netware 4.xx Device Driver 4.0 Errata in this release ======================= 1. The INSTALL program does not correctly identify multiple PCISCSI and PCISCSINR controllers. If you are using multiple controllers use the CUSTOM install feature and install the DOSCAM and SCSIDISK drivers manually. 2. Under Windows For Workgroup, the DOS driver MINICAM.SYS requires smartdrv with double buffering. If you do not want to use smartdrv with double buffering, install DOSCAM.SYS in place of MINICAM.SYS. 3. Chinon CD-ROM 535S drives do not work correctly under DOS/Windows environment. Please contact Chinon for new CD-ROM driver. 4. The hard disk security feature under Novell DOS 7.0 does not function properly. This will be fixed in a future BIOS release. 5. Before installing OS/2 on a Premiere/PCI Pentium system you must first enter the ROM SETUP (see systems users manual) during the system boot process and set the ISA IRQ 9 from FREE to USED (option in the Advanced CMOS SETUP). Not following this procedure will result in system hangs during OS/2 installation and boot-up. 5.0 Using Multiple Controllers ============================================================================== When installing multiple controllers, the BOOT drive must be configured to the controller card in the highest addessed PCI slot. The rules for configuring the boot drive vary depending on the system AND the controller cards being installed. The setup requirements are simple: 1) When multiple controller types (PCISCSI and PCISCSINR) are used together in the same system, the boot device must be attached to the PCISCSINR controller. 2) When identical controller types are used, the boot device must be connected to the controller card that is in the highest addressed PCI slot. Refer to you system technical manual on PCI slot addresses as this is system specific. For Intel's Premiere and Classic PCI Baby-AT style mother boards the following table indicates which slot the controller with the boot device must be placed. These Intel motherboards have three PCI slots located on them. The PCI slots are numbered 1, 2, 3 from left to right as viewed from the front of the system. B = PCISCSI/PCISCSINR Controller with Boot Drive Attached X = 2nd/3rd PCISCSI/PCISCSINR controller PCI SLOTS - System Back 1 2 3 ============ X B X B X B X X B - System Front For Intel's LPX style motherboards, there is a riser card which has two PCI slots on it. The PCI slot which is closest to the top of the card will be the slot which must contain the controller with the BOOT drive on it. 6.0 Differences between Driver Release 1.0 and 2.0 =========================================================================== In Release 2.0 the following drivers/changes have been made: - Updated Novell Netware drivers to support shared interrupts and increase performance - Updated EMM386.EXE to allow the various SCSI drivers to be load in high memory space under DOS environments - Updated OS/2 drivers to eliminate the 16MB memory barrier 7.0 Updated EMM386 Memory Manager =========================================================================== Included on the release diskette is an updated version of the EMM386 MS DOS memory manager for use with MS DOS 6.x systems. This new version allows the user to load the PCISCSI and PCISCSINR drivers in 'high' (expanded) memory space. To load the SCSI drivers into high memory, move the driver invocation in your config.sys after the EMM386 call. Classic/PCI platforms REQUIRE an "EMM386" version dated 3/25/94, or later. The correct version of "EMM386" is included on this diskette and is also supplied with MS-DOS version 6.21, or later (non-OEM only). Please take a few moments to update your system with this "EMM386" version and ensure that it is installed properly (w/o ".SYS" extension) in the CONFIG.SYS file. The following steps assume that MS-DOS files reside in "C:\DOS". 1) If needed, edit CONFIG.SYS so that "EMM386" appears as follows: DEVICE=C:\DOS\EMM386 2) Change to the MS-DOS directory: C:\> cd dos 2) Rename the existing "EMM386" file: C:\DOS> ren emm386.sys emm386.old - OR - C:\DOS> ren emm386.exe emm386.old 3) Copy the new version of "EMM386" to the DOS directory: C:\DOS> copy a:\emm386.exe 4) Reboot the system to allow the above changes to take effect. 8.0 Copyrights/Trademarks ============================================================================ Novell DOS is a trademark of Novell Inc. Novell is a registered trademark of Novell Inc. Netware is a registered trademark of Novell Inc. OS/2 is a registered trademark of IBM Corporation. Windows is a trademark of Microsoft Corporation. Windows NT is trademark of Microsoft Corporation