*SCSIworksTitle SCSIworks! (TM) Installation v1.00 *SCSIworksCopyRight (c) Future Domain Corporation, 1993 *SCSIworksText How would you like to install SCSIworks! (TM)? *SCSIworksMenu Auto Custom Cancel *DefaultsTitle Boot Drive and Target Directory *DefaultsText Enter the correct boot drive and the target directory, or press [ENTER] to accept the defaults. *CustomTitle Custom Installation *CustomText Each file you select from the files menu by pressing [ENTER] will be installed to the appropriate system file (either CONFIG.SYS or AUTOEXEC.BAT). Pressing the TAB key will toggle you between the information window and Files menu. When you are finished, press ESCAPE to continue. *CustInfo File Description *CustomFile Files *InstallFileTitle Install File *InstallFileText This line will be installed to either the CONFIG.SYS or AUTOEXEC.BAT file. To accept the default, press the ENTER key. If you wish to exit without making changes, press ESCAPE. Otherwise, edit the entry and press ENTER. *YesNoMenu Yes No *OkMenu OK *ErrorInstallingFile There was an error installing this file. *FileInstalledText This file is already installed. Do you wish to replace it? *UpdateConfigTitle Updating CONFIG.SYS *UpdateConfigText Changes should be made to the CONFIG.SYS file. Would you like to update CONFIG.SYS? *UpdateAutoexecTitle Updating AUTOEXEC.BAT *UpdateAutoexecText Changes should be made to the AUTOEXEC.BAT file. Would you like to update AUTOEXEC.BAT? *NoDevicesFoundTitle No SCSI peripherals Found *NoDevicesFoundText No SCSI peripherals were found while scanning the SCSI bus. No changes have been made to the system files. *CAMInstalledTitle CAM Installed *CAMInstalledText CAM has been successfully installed. You must reboot your system and rerun this program to install the necessary SCSIworks! (TM) device drivers. *CAMNotInstalledTitle CAM Not Installed *CAMNotInstalledText CAM has not been successfully installed. You must install CAM before installing the SCSIworks! (TM) drivers. *SCSIworksInstalledTitle SCSIworks! (TM) Installed *SCSIworksInstalledText SCSIworks! (TM) has been installed successfully. To enable the drivers reboot your system. *SCSIworksNotInstalledTitle SCSIworks! (TM) Not Installed *SCSIworksNotInstalledText SCSIworks! (TM) has not been successfully installed. *NoWindowsSupportTitle Windows Device Driver *NoWindowsSupportText Windows device drivers may not be installed using the DOS installation program. To install Windows drivers, you must run the SCSIworks! (TM) Windows Installation program. *TMC950Found1 A TMC-950 chip based SCSI controller has been found at *TMC950Found2 . Please select the correct interrupt for this SCSI controller. *TMC950IntTitle TMC 950 SCSI Controller Found *NoChangesMadeTitle No Changes Made *NoChangesMadeText No updates are required to your system. No changes have been made to your system files. *InstallingTitle Installing *InstallingText DINSTALL is scanning the SCSI bus and copying the necessary files to the target directory. When SCSIworks! (TM) has completed this process, you will be asked if you would like to update your CONFIG.SYS and your AUTOEXEC.BAT files. If you update these files, the original files will be saved as CONFIG.OLD and AUTOEXEC.OLD. *ErrorCreatingDirectoryTitle Error Creating Target Directory *ErrorCreatingDirectoryText SCSIworks! (TM) was unable to create the target directory. Please try again.