================================================================================
=                                                                              =
=                    8000 SERIES IDE ATAPI CD-ROM DRIVE                        =
=                            INSTALLATION GUIDE                                =
=                                  UNDER                                       =
=                              OS/2 (2.xx/3)                                   =
=                                                                              =
=                               (JAN-23-95)                                    =
=                                                                              =
================================================================================

           ============================================================
            N.B.  - All 8000 SERIES IDE ATAPI CD-ROM are using the same
                     driver - OSIDE101.FLT.
                              (ver 1.01)
           ============================================================

CONTENTS:
---------

PART 1: FIRST TIME OS/2 (2.xx/3) INSTALLATION FROM 8000 SERIES IDE ATAPI CD-ROM
        DRIVES

        I.  PROCEDURAL STEPS
        II. FURTHER CHECKING

PART 2: INSTALLATION OF 8000 SERIES IDE ATAPI CD-ROM DRIVES AFTER OS/2 (2.xx/3) 
        IS INSTALLED

        I.  PROCEDURAL STEPS
        II. FURTHER CHECKING




PART 1: FIRST TIME OS/2 (2.xx/3) INSTALLATION FROM 8000 SERIES IDE ATAPI CD-ROM
-------------------------------------------------------------------------------
        DRIVES
        ------

        Key:
              DISK 1 = "Diskette 1" if OS/2 (2.1/2.11) package is used.
                     = "Diskette for CD-ROM" if OS/2 3 WARP package is
                       used.

              DISK 2 = A brand new 3.5inch-1.44MB formatted diskette.


        I. PROCEDURAL STEPS
        -------------------
           1. Duplicate "DISK 1" into a newly formatted diskette and label
              it "DISK 2";

           2. Copy the 8000 series CD-ROM driver file (OSIDE101.FLT) into
              "DISK 2";

           3. Add the statement below into the CONFIG.SYS file in "DISK 2":

                BASEDEV=OSIDE101.FLT


           4. Switch off the PC power, connect up 8000 series IDE CD-ROM drive.

           5. Boot up the PC up using the OS/2 (2.xx/3) installation booting
              diskette. When the installation program requests for "DISK 1",
              insert "DISK 2" instead. Then put in the OS/2 Installation CD-ROM
              into 8000 series CD-ROM drive and press ENTER to continue to proceed
              with OS/2 installation following the standard installation
              instructions.

           6. After OS/2 (2.xx/3) is fully installed, copy the OSIDE101.FLT
              into C:\OS2 directory (assuming that C drive is OS/2 booting
              drive). For OS/2 3 WARP, the correct directory should be
              C:\OS2\BOOT.


       II. FURTHER CHECKING
       --------------------
           Make sure:-

           1. The following files exist in the directory C:\OS2 for
              OS/2 2.xx/3 (assuming that C drive is OS/2 booting drive):

                                CDFS.IFS
                                OS2CDROM.DMD
                                OSIDE101.FLT

              For OS/2 3 WARP, the correct directory should be C:\OS2\BOOT.

           2. The following statements exist in C:\ (assuming that C drive is
              OS/2 booting drive):

                                IFS=CDFS.IFS /Q
                                BASEDEV=OS2CDROM.DMD /Q
                                BASEDEV=OSIDE101.FLT

              For OS/2 3 WARP, the correct statements should be:

                                IFS=C:\OS2\BOOT\CDFS.IFS /Q
                                DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
                                BASEDEV=OSIDE101.FLT




PART 2: INSTALLATION OF 8000 SERIES IDE ATAPI CD-ROM DRIVES AFTER OS/2 (2.xx/3) 
-------------------------------------------------------------------------------
        IS INSTALLED
        ------------

        =============================================================
         NOTE. - This guide is only suitable for users who intend to
                 install 8001 IDE/8222 IDE ATAPI CD-ROM drive
                 _AFTER_ OS/2 (2.xx/3) is installed.
        =============================================================


        I. PROCEDURAL STEPS
        -------------------

           1. Insert "CD-ROM Installation Diskette" included in the package
              into floppy drive A or B;

           2. First, invoke OS/2's SYSTEM FOLDER, followed by SYSTEM SETUP
              FOLDER, then execute DEVICE DRIVER INSTALL program to run driver
              installation;

           3. After the DEVICE DRIVER INSTALATION dialog appears, ensure that
              the SOURCE DIRECTORY field is correct. i.e. the  SOURCE DIRECTORY
              should correspond to where the Installation Diskette is (drive A
              or B) with appropriate directory stated;

           4. When SELECT DEVICE DRIVERS dialog appears, select "8001 IDE/
              8222 IDE ATAPI CD-ROM Device Driver" by single clicking the
              field. Then click OK button, and then INSTALL button to install.


       II. FURTHER CHECKING
       --------------------
           Please refer to PART 1, Section II's FURTHER CHECKING.






=============================== END OF DOCUMENT ================================