Page 1 of 1

Trunk Bumpers?

PostPosted: 19 Aug 2011 20:18
by cv70chall
Can anyone tell me where I would correctly place the little rubber trunk bumpers? Once again, the fact that it's been a good 10 months since I've worked on this area results in my forgetting where things go!

Thanks

Re: Trunk Bumpers?

PostPosted: 20 Aug 2011 3:36
by Alaskan_TA
Trunk bumpers are round.

Re: Trunk Bumpers?

PostPosted: 23 Aug 2011 13:46
by burdar
Those look like they may be for the doors.

Re: Trunk Bumpers?

PostPosted: 23 Aug 2011 14:13
by dave-r
burdar wrote:Those look like they may be for the doors.


That is what I was thinking.

Re: Trunk Bumpers?

PostPosted: 26 Aug 2011 2:16
by DAYLEY/CHALLENGER
Those are the door bumpers.........pic of my old ones before replacing with the black. Thought I had one of the trunk but can't find it.............

Re: Trunk Bumpers?

PostPosted: 26 Aug 2011 14:51
by cv70chall
Yeah, there has to be some sort of bumper for the trunk. Mine seems to "hit" fairly hard when I open it and I figure there must be some sort of stop bumper for it.

Thanks

Re: Trunk Bumpers?

PostPosted: 26 Aug 2011 18:23
by burdar
There are round rubber bumpers at the rear of the trunk lid....one on each side. There aren't any stop bumpers for when the trunk lid is opened. If it's opening too fast, you can adjust the torsion springs to a different slot. I believe the farthest slot to the rear has the least amount of tension.

Re: Trunk Bumpers?

PostPosted: 26 Aug 2011 19:37
by cv70chall
Have you got a photo of the stoppers?
Thanks again!