Page 1 of 1
Rough Paint Reproduction??
Posted:
03 Sep 2009 22:08
by 74'Challenger
Can anyone tell me how to reproduce the rough paint on a 74' Challenger?
Posted:
04 Sep 2009 11:46
by rtse4406pack
just hire a paint shop with a bad reputation
just kidding.
what do you mean by rough paint?
tear drops/orange peal/discoloration etc.............
Posted:
04 Sep 2009 12:42
by dave-r
I think he means the rough textured Argent used on things like the JH grille and the rear plate above the rear lights on the SE etc..
Posted:
04 Sep 2009 13:17
by burdar
The 72-74 Challengers use a textured argent paint on the tail panel. There are two factory textured argent colors. Light argent and med/dark argent. The correct color for the 72-74 Challengers is the med/dark argent.
Totally Auto sells both argent colors in a spray can...they are fairly close to the correct colors as factory but arn't 100%.
There are also other paint brands that make textured paint that is close to factory appearing. rtse4406pack just got done painting his shaker with one of those paints and had good success with it.
Posted:
04 Sep 2009 13:22
by dave-r
burdar wrote:The 72-74 Challengers use a textured argent paint on the tail panel.
I had forgotten that. You see so many painted black.
Posted:
04 Sep 2009 14:10
by burdar
I had forgotten that. You see so many painted black.
No kidding.
I spent a lot of time looking at 72-74 Challengers this year at the Mopar Nats in Ohio. I needed to find the correct argent for my 73 build. I only found 2 cars that were painted correctly.
Posted:
05 Sep 2009 3:22
by rtse4406pack
this stuff is great,
perfect match for the medium argent.
Posted:
06 Sep 2009 2:06
by 74'Challenger
dave-r wrote:I think he means the rough textured Argent used on things like the JH grille and the rear plate above the rear lights on the SE etc..
Yeah. That's exactly what I meant.
Posted:
06 Sep 2009 2:08
by 74'Challenger
rtse4406pack wrote:this stuff is great,
perfect match for the medium argent.
Thanks for all the help!
Posted:
06 Sep 2009 14:42
by burdar
Talking with the owner of a 73 Challenger this year at the Mopar Nats, I found out how the factory painted the tailpanel area.
The tail light housings were first sprayed completely with organisol black. Then the tail light areas were masked off and the med/dark argent was sprayed ontop of the black. If you look at origonal housings, you can see small black specks showing through the argent.
That only applies to the light housings though. The accual tail panel wouldn't have had any black sprayed on it before the argent was applied. That means the light housings and the tail panel would have had a slightly different appearence.