The Dodge Challenger Message Board

Anyone know where I can get a complete lock set for a 73. Trunk, ignition, doors, glove box, center consol? My 73 didnt come with the same door or igition keys, or keys for the glove box and center consol.

Of course, Year One! California. Or National Moparts, canada ontario. Actually, you can probably order it right from a Chrysler dealership. Probably cheaper too. Oh, ebay has them everyday for about $35 american.

peace!

Try stestak (SP) on ebay Has full sets for 165.00 usd

Or you could take the trunk lock apart, and fiddle with it to make it match your door key.
A friend of mine did that to a handful of Mopar lock cylinders (73 cuda, 74 Monaco), and it's really easy (if you can handle small brass cylinders that hav a diameter of 2mm and a length between 4 and 8mm or so.
I saw him do it in 10 minutes on the kitchen table, all it requires is a flat surface, a pair of tweezers. All it takes is to align the cylinders in the proper order to fit the key indentations. Maybe a file if some are too long. And a trip to some DIY shop to find a bar with the right diameter if you need to cut new ones (although I've never seen my friend need to do that).

If I remember correctly, there's a metal plate that you slide out, underneath it are 5 springs and 5 cylinders. Don't lose the springs; you'll have to put them back when it's over. All you need for trial fitting is the key, the lock and the cylinders.

Hey, try www.paddockparts.com. They carry a huge number of mopar parts, and you can get a brand new set of door, ignition, trunk, and glovebox locks for about 70 dollars. I dont know about the console. A lot of their stuff is a bit high for my taste, but some little odds and ends like this are a great find.