Page 1 of 1

bonnet springs

PostPosted: 19 Feb 2004 22:06
by 144
hi, im a recent challenger owner and have quite a few questions for you good people. i purchased my 73 has an unfinished project so will be harrassing you lot on a regular basis on different topics as i encounter them, hope thats o.k. my query for today is that my car has a fibreglass bonnet, i was wondering if a weaker hinge spring is available as the ones i have are much too strong,thanx Mark.

PostPosted: 24 Feb 2004 5:33
by Christer
You can buy repros of the T/A hood hinge springs (from Year One for instance). $62.00 a set.

By the way, I just noticed that the AAR springs have a different part number. I guess it is because of the shorter hood on ´Cudas. Those springs should even be softer than the T/A springs. I wonder if they would be an alternative if you have a VERY light hood? (or do the length of the springs differ between T/A and AAR?)

PostPosted: 24 Feb 2004 8:11
by dave-r
I would think they are the same length and possibly just a different spring rate?
What ever the rate is it still seems too high judging by the number of T/A and AAR hoods you see bending up in the middle!

PostPosted: 24 Feb 2004 9:06
by Christer
For those unfamiliar with bent fibre-glass hood problems, it is a known solution to leave the hood open during storage.
Highly recommended in other words.

PostPosted: 02 Mar 2004 12:52
by 144
thanks for the info folks.