The Dodge Challenger Message Board

I got a pair of these (repro fiberglass) off Ebay for about 1/2 the price of YO or the Paddock, but no mounting hardware. The Paddock has a mounting hardware set for $10, but then add shipping and it can add up quickly. For those of you who already have them on your Challengers, what exactly is the mounting hardware required? 3 or 4 bolts with nuts and large flat washers per piece? Unless there's something else special required, $10 + shipping seems a bit steep for a handfull of bolts, nuts and washers. Can anyone out there tell me what they used on their's?

Thanks.

I got the correct ones and they are bolts attached with nuts attached to washers. Spend the $10 bucks or just use nuts and washers. Nobody sees them. Be careful to mount them in the correct fashion. The pieces should be marked left and right. The pieces are not symetrical. I had approximately a 3 finger space in the middle.

Steve,
Thanks. I've downloaded some pics of T/As with the spoilers mounted to use as a reference. The pieces are not marked left/right, so the pics will be VERY useful. The "3-finger" space info will be very useful, too.