Window adjusment

Postby Luke (Luke) » 25 Feb 2003 14:19

does anybody have any tip's on adjusting door glass, mine seem to be loose (when the window is right up and door is open they move back an forth)
Luke (Luke)
 

Window adjusment

Postby Dave-R (Roppa440) » 25 Feb 2003 20:58

There are adjusting bolts inside the door under the plastic panel. Sometimes you need to lengthen the slots for the bolts to get the glass to seal correctly. It sounds like yours are just loose.

With the panel removed pushe the top of the glass back and forwards to see which bolts are moving/missing.
Dave-R (Roppa440)
 

Window adjusment

Postby Jay Gilmore (Mickey_mouse » 27 Feb 2003 3:00

l found as DR states lenghen channel slots in bottom of door this will bring glass closer in at top.Check the two small material covered ajusters top of door as these can be ajusted to take out side to side play.. if material worn replace or recover as this will cause scratched glass. It is very important to grease channel slides and slides on glass and the window winding mechinism itself to ensure a smooth operation
Jay Gilmore (Mickey_mouse