The Dodge Challenger Message Board

hey Christer,
I was told that the full quarters and all other Chrysler and Dodge parts are now readily available ( for a large price) because Chrysler sold the rights so an outside source could reproduce.

pink panther wrote:hey Christer,
I was told that the full quarters and all other Chrysler and Dodge parts are now readily available ( for a large price) because Chrysler sold the rights so an outside source could reproduce.

Thanks for the information!

pink panther wrote:I was told that the full quarters and all other Chrysler and Dodge parts are now readily available ( for a large price) because Chrysler sold the rights so an outside source could reproduce.

Do you mean their resto program or is there something else going on?

See this: http://challenger.mpoli.fi/forum/viewtopic.php?t=4341
and this: http://challenger.mpoli.fi/forum/viewtopic.php?t=4671

I meant on the resto parts. It has started with the quarters as you can now buy the whole quarter from outside sources. All other parts are soon to come for A,B,E bodies.

Christer wrote:Maybe not a new product but it sure looks like a VERY low priced quality produt to me:

http://www.uscartool.com/

dave-r wrote:http://www.uscartool.com/

Yeah, but $149 is a little bit more than $42.99. I wonder where the hook is?

It looks to me like the one on ebay is a copy of this guys design.

PLUS I think the loop should be steel to pass safety inspection at most tracks?

dave-r wrote:PLUS I think the loop should be steel to pass safety inspection at most tracks?

It looks as if you are right (again...)!

I got this: In place of a crossmember, in the vicinity of the front universal joint, all cars in competition using open driveshafts, must have a retainer loop 360-degrees of enclosure, 1/4-inch (6.35 mm) minimum thickness and 2-inches (5.1 cm) wide, or 7/8-inch (22.2 mm) x .065-inch (1.65 mm) welded steel tubing, securely mounted and located within 6-inches (15.2 cm) of the front universal joint for support of the driveshaft in event of U-joint failure.
From: http://members.tripod.com/MY5LTR/NHRArules.html

Complete front fenders (incl bracing) will be available from www.yearone.com in spring 2006. Price? $500 each sounds like a fair price to me. (That is if the quality is top class, of course). They will be available for both ´70-´71 and ´72-´74 Challengers.

Well, I haven´t seen this product before. Have you? The only questionmark is the quality (as with all repops). Except for that, it is great that all of us with dented bezels have this choise.

Set 1970 NEW Reporduction CHALLENGER HEADLIGHT BEZELS,
The bezel made by Aluminum and clear coat anodized to the original,THIS EXACLY LIKE ORIGINAL .

http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWA%3AIT

Sellers ebay nickname: eparts4cars

Buy it now: $395

Ebay store: http://stores.ebay.com/P-G-CLASSIC-STORE

So simple and so useful I wish I had knew about this product before.....

New reproduction 70-74 CUDA/CHALLENGER 26" RADIATOR RAD SUPPORT PASSENGER SIDE PANEL,YOU ONLY NEED THIS PANEL TO CONVERT SMALL RAD TO 26" RAD LIKE ORIGINAL.

Buy it now:$125

Sellers ebay nickname: eparts4cars (Btw: Is anyone familiar with this company? It seems like they have a lot of useful products. Is the quality OK?)

http://cgi.ebay.com/ebaymotors/70-74-HE ... enameZWDVW

great find looks like my seach is over
cheers ian

check out his web site www.pgclassic.com its cheaper than his ebay price
cheers ian

ianandjess wrote:great find looks like my seach is over
cheers ian

I was going to give you a hint about them, but you found them yourself. I hope you will be satisfied with them if you buy them. It would be very intresting to know what you think of them. Please, drop us a line....

Did you see those 4 horrible words on the home page?

"USA & Canada only"

Guess that leaves us out as usual.

Bilko wrote:Did you see those 4 horrible words on the home page?

"USA & Canada only"

Guess that leaves us out as usual.

Unless you find one of us in the usa that will buy it then ship to you.

I might be willing to do it if its not too much of a hassel to ship over the ocean to you guys.

it looks to me like the usa & canada only is relevent to the free shipping for purchases over $500

Bilko wrote:Did you see those 4 horrible words on the home page?

"USA & Canada only"

Guess that leaves us out as usual.

I have quite often noticed that the same products are beeing sold at two different prices depending on if you live in US/Canada or in Europe for instance. I have asked myself why? I guess it is becuse the sellers think they take a greater risk when they ship overseas or maybe because of the fact that they can add one or two dollars due to that fewer sellers are selling worldwide (compared to the US market). In other words: The competition is not so stiff so they can sell even though the prices are not very low. It sometimes feels a bit unfair and depressing, but that´s the way it is and nothing much to do about, I guess.

Reproduction 1971-74 E-Boby and 1971-72 B-Body rallye mirrors are now available from eparts4cars (ebay nickname). call 506-473-0153 or e-mail: eparts4cars@hotmail.com www.pgclassic.com

Reproduction 1970-74 NEW Mopar Cuda Challenger 383 440 Throttle Cable, the cable exactly like original 21", is now available from eparts4cars (ebay nickname). call 506-473-0153 or e-mail: eparts4cars@hotmail.com www.pgclassic.com

I won a pair of the Headlight Bezels on Ebay on the 3rd Jan. I phoned them and they were ok with shipping to the UK. But shipping was only $35 They haven't arrived yet.... I'll let you know.

Chuck_Key wrote:I won a pair of the Headlight Bezels on Ebay on the 3rd Jan. I phoned them and they were ok with shipping to the UK. But shipping was only $35 They haven't arrived yet.... I'll let you know.

Yeah, keep us posted, please.

$35 in shipping is not very much if you compare to the $395 a set costs. Just my opinion. ...or have I misunderstood your point?

To ship from Canada usually takes longer than from the US, right?

This is a reproduction part that will be popular:

http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEAFB%3AIT

I bought one as mine is badly warped through heat. Friendly seller who I have dealt with in the past. I'll give you an honest opinion when it arrives.

Christer wrote:$35 in shipping is not very much if you compare to the $395 a set costs. Just my opinion. ...or have I misunderstood your point?

To ship from Canada usually takes longer than from the US, right?

I hope you're right regarding it taking longer. Yes $35 is not very much.. I have a nagging feeling it's not enough!

Chuck_Key wrote:

Christer wrote:$35 in shipping is not very much if you compare to the $395 a set costs. Just my opinion. ...or have I misunderstood your point?

To ship from Canada usually takes longer than from the US, right?

I hope you're right regarding it taking longer. Yes $35 is not very much.. I have a nagging feeling it's not enough!

When shipping takes longer time than expected, it usually means that the package is laying in a customs office or something. At least, that is my experiance. If that happens to us Swedes, then we are lucky enough to have to pay an additional tax of 25% The tax is calculated on the total "price+shipping" cost. I like the taxes in my country NOT. I really hope there will be a change in the election this autumn but I doubt it.

After I had turned off my computer, I realized that you probably meant that $35 shipping and one month delivery time is not exactly what you can call value for the money.

Bilko wrote:I'll give you an honest opinion when it arrives.

No money under the table then? Promise? Just joking. We are looking forward to hear about your comments. I presume that the lid only is available in black and white or something,right? To have a red interior has its disadvantages....

Happy 1000th posting Christer!

Bilko wrote:Happy 1000th posting Christer!

Thanks! I didn´t notice that at first Let´s bring out the champagne then

New Dodge cap for the 70-71 rimblow steering wheels. It was used on the 70-71 Challengers and some 70 B-body Dodges. It is made from all new parts and is ready to snap on.

Sellers ebay nickname: plumbeeper
Price: Highest bid