1970 R/T 440 six pack convertible 4-speed consider selling

Postby woolwolf » 23 Jul 2008 23:24

I have a 70 440-6 pack convertible with pistol 4-speed. I've owned it since 1974 and it is original and complete. I would consider it in rough condition as it has been sitting outside under a tarp for past 30 years. It was originally plum purple but I painted black around 1976 in high school shop class. Anyway I'm thinking about selling it and was wondering about the best approach and what it should bring.

I see an orange one on E-bay that has buy now for $320k+.http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0253893547

Mine is no way in that condition and the only other difference(besides color and condition) is the hood. I don't have the shaker style but the two nozzle looking pin type.

So I'm turning to you experts for advise. Thanks.
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby jh27n0b » 24 Jul 2008 10:19

In order to help you decide on a value we would need more info. As you know this car could potentially be pretty valuable. Does the car still have the original motor and tranny? Does the car have any rust or body damage issues? What kind if any documentation do you have for the car [ie.fender tag, build sheet, original window sticker]? These are all factors in the value of the car.

Can you post some pics?
Bob
User avatar
jh27n0b
Frequent Poster
 
Posts: 389
Joined: 02 Apr 2006 12:05
Location: Indiana

Postby woolwolf » 24 Jul 2008 19:48

Bob thanks for your response. Yes Im almost certain it is original body, motor, tranny, rear end, dash. It also has rust and rag top is a rag but car is not wrecked. I will get #'s this week end and dig out title? I don'thave any build sheet or sticker.

I take it the #'s needed are from the dash, door, fender and block?
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby drewcrane » 24 Jul 2008 20:29

hey wool im in denver, what do you need out of the car i mean seriously, what will it take to remove it from your hands, and do you have any pics, old or new?
User avatar
drewcrane
Frequent Poster
 
Posts: 2893
Joined: 01 Sep 2007 12:36
Location: "follow the laraya belt ,that should get ya there"

Postby woolwolf » 24 Jul 2008 20:55

I'm going to try my best to get the #'s and pics this weekend. I had to move the car from my sisters about 10 years ago & its still sitting on the trailer I used to move it. But its behind some old farm equip so i have to hitch the tractor and move some junk to get at it and to pull out from behind barn.

Weather permitting hoping saturday.
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby woolwolf » 26 Jul 2008 2:35

Ok I got the R/T out late tonight. It looks really rough too much of a project for me.
Even though its dark out I managed a few pictures. How do you load/attach for veiwing?
The numbers on door were painted over (from me changing it to black) and starting to peel away so I couldn't read them at night and probally not even in daylight.

The #'s on the dash plate located drivers side corner top are
JS27VOB204087

Its to late tonight as it was quite a job just getting the trailer hitched up so I didnt' try to open hood yet. Tomorow I give it a go.

Oh yea I didn't understand from reading the FAQ how to put the pitcures up.
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby jh27n0b » 26 Jul 2008 10:58

Hello Woolwolf,
Congatulation on getting your car, it must stir up some memories. I own a 70 purple convertible Challenger that I have owned since 1982. It sat dormant for 20 years before I restored her.

The way to load a picture is at the bottom of your reply post. click on the browse tab and then locate the file that you stored your pics. then select the pictures that you want and click open. Make sure that the file size does not exceed the limit. When you prewiew the post the picture should load however it will preview first. If everything looks good then hit the submit tab and the picture will then appear at the end of your post.

I have added a picture of my car to make sure I was telling you the correct way to post a picture.

I hope this helps.
Bob
P.S. I would love to have a 70 440/6 pak 4 speed purple conv. sitting next to mine, if you do sell.

small challenger.jpg
User avatar
jh27n0b
Frequent Poster
 
Posts: 389
Joined: 02 Apr 2006 12:05
Location: Indiana

Postby woolwolf » 26 Jul 2008 12:48

Thanks Bob, here's try at picture. I took this morning and one last night.

P1010328.JPG
P1010323.JPG
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby drewcrane » 26 Jul 2008 12:51

looks likes its all there, whew needs some TLC,whew alot of work, but if you neeed to sell ,well post it here,and i might have a buyer!
User avatar
drewcrane
Frequent Poster
 
Posts: 2893
Joined: 01 Sep 2007 12:36
Location: "follow the laraya belt ,that should get ya there"

Postby Eddie » 26 Jul 2008 13:40

Pretty rough but I,ve seen worse. It's going to take a lot of sheetmetal, time, money. I'll wager Bob has had wood since he's laid eyes on it!! :lol:
User avatar
Eddie
Frequent Poster
 
Posts: 6212
Joined: 16 Oct 2006 21:26
Location: Terre Haute, Ind.

Postby jh27n0b » 26 Jul 2008 15:03

You are right about that Eddie.

Woolwolf

Post a picture of the fender tag or list the option codes. We will be able to decipher them for you. There are a lot of very knowledgeable guys on this site.

Look for the build sheets. They are usually behind the springs on the rear seat back and behind the plastic panels on the bucket seat backs. there are other locations so check out Barry Washington's web site.
http://www.hamtramck-historical.com/

Any documentation that you can find will help with whatever you do with the car.

Bob
P.S. how about a trade
User avatar
jh27n0b
Frequent Poster
 
Posts: 389
Joined: 02 Apr 2006 12:05
Location: Indiana

Postby woolwolf » 26 Jul 2008 16:30

Thanks Bob,
OK here pics of #'s so far.
After some errands I'll keep prying for sheets.

P1010334.JPG
Fender Plate:
YO5 26 EN1
N41 N42 N85 P37 R22 V6X
V3X A33 A62 C16 C55 545
FC7 H6XW 000 C01 046593
E87-D21 JS27 VOB 204087
P1010336.JPG
Here's the dash plate
P1010338.JPG
I think this is the door label you can see the black over the label.
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby rtse4406pack » 26 Jul 2008 17:58

yo5-usa built
26-26" rad
en1-end of assembly line shift 1
n41-dual exhaust
n42-dual chrome tips
n85-tach
p37-power covertible top
r22-am with 8 track stereo
v6x-black longtitude stripe
v3x-black convertible top
a33-track pack 3.54 posi with dana 9+3/4
a62-rallye gauges
c16 console
c55-bucket seats
545-???????????????????????????
fc7-plum crazy paint
h6xw-white vinyl interior/buckets
000-no upper door frame/full door panel trim
co1-december 01 1969 sced build date
046593-order#
e87-440 six pack 440 motor
d21-4 speed hemi trans
js27-70 convertible challenger
vob-440 six pack motor 1970 hamtramck
204087-seq.#

i can just picture that car all done,it would be a real beauty!

it seems that the 545 code must be mistaken for the j45 code? which would be the chrome hood pins.
rtse4406pack
Frequent Poster
 
Posts: 302
Joined: 14 Oct 2007 22:47

Postby blackmagic73 » 26 Jul 2008 18:43

It says J45 in the picture
blackmagic73
Frequent Poster
 
Posts: 73
Joined: 28 Feb 2008 1:55
Location: Mobile, AL

Postby woolwolf » 27 Jul 2008 12:14

Thanks rtse4406pack & blackmagic73! Those options are the right ones and it is code J45 not 545.
Also found Chrysler Corp Car Production Broadcast Sheet behind left front bucket seat.

P1010355.JPG
P1010356.JPG
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby patrick » 27 Jul 2008 15:06

A little ruff but, very nice, rare option car. Woolwolf, If you sell this car now, you'll hate yourself, later. :disbelief: Just talking with experience. :roll: Plus, the market is down. You put $40,000 into it. You got a $150,000 car! :nod: Or, you can unload it now, for $5,000 to $15,000. :s021: I know these are just car's but, they're worth a hell of a lot more now, then they were when we were kid's. Just something to think about.
Last edited by patrick on 27 Jul 2008 15:16, edited 1 time in total.
User avatar
patrick
Frequent Poster
 
Posts: 1323
Joined: 09 Jul 2007 0:56
Location: Washington State, U.S.A.

Postby rtse4406pack » 27 Jul 2008 15:10

woolwolf,can you email me at Danvil1@rogers.com

i would be interested in buying that car as is.
rtse4406pack
Frequent Poster
 
Posts: 302
Joined: 14 Oct 2007 22:47

70 Challenger Vert

Postby dgolay » 27 Jul 2008 15:49

I would be interested in buying the car as is.

please contact me at dgolay@iowatelecom.net

thanks

Doug
dgolay
 
Posts: 2
Joined: 21 Feb 2008 1:27
Location: USA

Scam

Postby dgolay » 31 Jul 2008 0:33

Scammer - the hotmail email address is no longer valid.

Update: I tried again this morning and the email went thru so not sure what's up? (yesterday was undeliverable - unknown user)

I apologize if he is real

Doug
Last edited by dgolay on 31 Jul 2008 14:26, edited 1 time in total.
dgolay
 
Posts: 2
Joined: 21 Feb 2008 1:27
Location: USA

Postby dave-r » 31 Jul 2008 10:53

As it is a requirement that you have a valid email address for this message board I am testing woolwolf's email address myself.

If it is not valid this member has 5 days to supply a valid address.
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Postby dave-r » 31 Jul 2008 13:08

My email to that address was delivered and replied to. It is valid.
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Postby woolwolf » 02 Aug 2008 23:24

I don't understand the scammer stuff as Someone misspelled the 2nd to last letter to my E-mail address/account and this after they had already e-mailed me twice. Oh well what I've provided is totally valid.

Right now I'm leaning toward Patrich's advice as still not sure what its worth and looking for a local shop to price the sheet metal work. I'm not worried about the engine, tranny, or rear end as I'm comfortable that their condition should be realatively easy fix up based on their condition when parked way back. But I'm lost when it comes to the body, paint ,or interior stuff and wil need to have that done if I decide to keep it.

Well just wanted to update and clear the scammer talk. Basically still not sure what to do at this point.
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby dave-r » 03 Aug 2008 8:05

It needs going right through by the look of it. Including all the electrical gear.
You need to be either familiar with doing this stuff or very keen to learn. But it will take a large financial and work commitment because either way it is a big project and the car is only a good investment for your money and time if you do it right.

Some of the guys here could turn this car around in a year. Mine has taken me three years since the last time I decided to "Tidy it up".
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Postby Adrian Worman » 04 Jan 2009 18:05

3 years ? Mines STILL taking the best part of 20 years! How has tne global financial depresion affected collector car values? Especially high profile stuff like Barret Jackson?
User avatar
Adrian Worman
Frequent Poster
 
Posts: 2051
Joined: 10 Mar 2007 23:54
Location: milton keynes

Postby fal308 » 04 Jan 2009 18:55

We'll find out starting January 13th in USA. Schedule at Speedtv.com http://www.speedtv.com/programs/barrett ... e-auction/
fal308
Frequent Poster
 
Posts: 981
Joined: 01 Jan 2004 13:57
Location: Pacific MO

Postby woolwolf » 08 Feb 2009 4:17

Update I have interest in selling this car and was asked for more pic.s so here they are. I didn't want to hurt the hood as hinges seem stuck so I'll work it off and take engine tomorrow. I did jack it up and manage to get the #' from the engine block and tranny.

P1010464.JPG
P1010467.JPG
P1010468.JPG
P1010469.JPG
P1010484.JPG
P1010470.JPG
P1010475.JPG
P1010504.JPG
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby woolwolf » 12 Feb 2009 2:35

Managed to get some pic.s from below and removed hood without much damage.

P1010536.JPG
Left front
P1010539.JPG
Left inside trunk
P1010542.JPG
Right inside trunk
P1010547.JPG
inside rt ft wheel well
P1010554.JPG
P1010556.JPG
P1010557.JPG
woolwolf
 
Posts: 11
Joined: 22 Jul 2008 23:43
Location: Kansas City

Postby dave-r » 12 Feb 2009 8:42

That is strange. It has the Chevy/Ford type tri-carb set-up on it and not the Chrysler six pack.
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Postby drewcrane » 12 Feb 2009 12:09

that is a sweet car , and what is with the carb set up? :s009:
User avatar
drewcrane
Frequent Poster
 
Posts: 2893
Joined: 01 Sep 2007 12:36
Location: "follow the laraya belt ,that should get ya there"

Postby Goldenblack440 » 12 Feb 2009 15:56

I hope this doesn't sound too negative, but why was this car so neglected for so long? Even from new, it was a rare and rather expensive car. Surely it could have been at least put on blocks and wrapped up better. Even 10 years ago when interest in these cars was reviving. Also wondering why it was painted black after only 6 years from new - was it really neglected right from new? If you bought it in 74, the paint must have been really trashed by the first owner. Rather sad really, but it was the fate of many of the rare cars we see surfacing now, that back in the 70's were "just another car". But its no different to say, a today's model Hemi Challenger being treated like a bucket for a few years, and then left out in a paddock for 30 years.

Just my 2cents worth anyway.
User avatar
Goldenblack440
Frequent Poster
 
Posts: 600
Joined: 08 Jul 2007 18:57