Page 1 of 1

Glovebox Light

PostPosted: 30 Mar 2009 16:00
by Moparman1972
Where does the light that illuminates the glovebox plug into? Does it come out of the glovebox door switch? I assume so, but my glovebox door switch only has one wire coming out of it, and that plugs into the 3 outlet plastic power block.

PostPosted: 31 Mar 2009 2:51
by Jon
The light fits into the right side of the glove box. lt may ground from the switch, as the glove box frame is paper. :s008: If you need I'll get under the dash and check it out. :thumbsup:

Re: Glovebox Light

PostPosted: 31 Mar 2009 12:20
by 71_DEPUTY
Moparman1972 wrote:Where does the light that illuminates the glovebox plug into?

red three bullet connector


Does it come out of the glovebox door switch?

switch/light pops into the outside steel frame of the box- light goes in side- light then comes out of a hole with a plactic lens

I assume so, but my glovebox door switch only has one wire coming out of it, and that plugs into the 3 outlet plastic power block.


correct- shell of light is grounded via steel frame


PostPosted: 31 Mar 2009 16:28
by Moparman1972
Sorry I should have been more specific. I only have the glovebox door switch. There is no light and my glovebox is long gone. Does the power for said glovebox light go into the door switch and then come back out of the switch and go to the light? There is no wire coming out of my switch right now.

Thats what I meant when I asked if the light came from the door switch.

PostPosted: 31 Mar 2009 18:00
by Moparman1972
The extension of this would be, Where the F%*& does the power wire going to the light, come out of the switch?

PostPosted: 01 Apr 2009 0:15
by 71_DEPUTY
Here is what most look like- some have longer tail wire to the connector.

PostPosted: 01 Apr 2009 22:09
by Moparman1972
So the bulb IS in the switch, not separate!.....if I am seeing a bulb sticking out the other end of that. Boy this one threw me for a loop. :s008:

Thanks 71_Deputy!

PostPosted: 03 Apr 2009 0:55
by 71_DEPUTY
your welcome!!!! think this one is out of a 3 gen. b-body.- e's are a longer one with the bulllet connector and second gen Chargers went all the way to the fuse box on a spade terminal!!!