Page 1 of 1

rear seat bolts missing,what size?

PostPosted: 27 Sep 2008 14:21
by rtse4406pack
hi guys,can anyone tell me what size the 2 bottom rear seat bolts are.when i took my rear seat off the 2 bolts where missing which are along the bottom where the u bars are.

PostPosted: 27 Sep 2008 14:37
by dave-r
Seat belt bolts are a standard size. They only differ a little in total length and length on the unthreaded shoulder.

Try a couple from a salvage yard. Chances are they will fit right in.

Seat Bolts

PostPosted: 01 Oct 2008 23:33
by transman
I had one break on me when I was putting some sound deadener in the car. No problem finding them at a hardware store. Just some standard stock, and I think they were 3/8 coarse thread by about 1 - 1 1/2" long.

transman 8)

PostPosted: 02 Oct 2008 0:16
by PlumCrazyRTSE
I think this may be what you're looking for. The first image is from the "Guide to E Body Fasteners". I know the bolt drawing (left side) doesn't match the picture (right side) but the picture is correct and the size given (1/4-14 x .875"lg) appears to be correct.

The second image is a picture of one of the rear seat bolts from my car.

PostPosted: 02 Oct 2008 2:17
by rtse4406pack
PlumCrazyRTSE wrote:I think this may be what you're looking for. The first image is from the "Guide to E Body Fasteners". I know the bolt drawing (left side) doesn't match the picture (right side) but the picture is correct and the size given (1/4-14 x .875"lg) appears to be correct.

The second image is a picture of one of the rear seat bolts from my car.

thank you plumcrazyrtse,that is exactly what i am looking for.time to hit the hardware stores. :wink:

Re: Seat Bolts

PostPosted: 02 Oct 2008 6:43
by fbernard
transman wrote:I had one break on me when I was putting some sound deadener in the car.


What material did you use, and are you happy with the results?
I'm thinking about doing this this winter..

PostPosted: 02 Oct 2008 8:17
by dave-r
Seat bolts. Seat belt bolts. I can't read can I? :bonk:

Anyway. They are technically screws if threaded all the way up the shaft. :p:

PostPosted: 02 Oct 2008 19:40
by rtse4406pack
hey guys,thanks again!
screw bolts with washers $1.
problem solved. :nod:
just goes to show that some problems are cheap with a little help from some friends. :thumbsup:

PostPosted: 03 Oct 2008 8:42
by dave-r
rtse4406pack wrote:just goes to show that some problems are cheap with a little help from some friends. :thumbsup:


As long as they are not confused or have a screw loose themselves like me. :s008: :s006: :hmmm: