Manual Choke actuation - where is it inside the car?

Postby blackmagic73 » 03 Apr 2008 13:28

My '73 came with a manually choked 318 (didn't come in the car, and the interior was partially disassembled. I was wondering if anyone could show me a picture of where the choke pull is inside their car. Thanks.
blackmagic73
Frequent Poster
 
Posts: 73
Joined: 28 Feb 2008 1:55
Location: Mobile, AL

Re: Manual Choke actuation - where is it inside the car?

Postby patrick » 06 Apr 2008 7:13

blackmagic73 wrote:My '73 came with a manually choked 318 (didn't come in the car, and the interior was partially disassembled. I was wondering if anyone could show me a picture of where the choke pull is inside their car. Thanks.
Hello, Black Magic! To tell you the truth, unless, it was special ordered. I don't recall any 73's, with a manual choke. :roll:
User avatar
patrick
Frequent Poster
 
Posts: 1323
Joined: 09 Jul 2007 0:56
Location: Washington State, U.S.A.

Postby blackmagic73 » 18 Apr 2008 14:25

Hmmm. Well, I guess that gives me some freedom of choice, then. Thanks anyhow.
blackmagic73
Frequent Poster
 
Posts: 73
Joined: 28 Feb 2008 1:55
Location: Mobile, AL

Postby Jon » 20 Apr 2008 2:35

My camera is on the fritz otherwise I would send a picture, but there are a few holes in the bottom of the dash just right of your throttle that will accept the choke bracket. The cable can be run out the wiring hole in the cowl near the regulator. It may need some filing to make room for the cable through. That's on a 70, I don't know what may have changed by 73.
User avatar
Jon
Frequent Poster
 
Posts: 1229
Joined: 21 Aug 2005 15:12
Location: Medford Oregon

Postby Moparman1972 » 20 Apr 2008 23:56

My 73 Cuda is manually choked from the factory, sorry, totally spaced that when i first read this. The choke pull is right under the ashtray, and mounts left of center of the tray with a little bracket. I will post pics when I get some batteries for my camera.
Moparman1972
Frequent Poster
 
Posts: 538
Joined: 29 Apr 2006 17:10
Location: Connecticut

Postby blackmagic73 » 07 Jun 2008 19:54

Thanks. Pictures would be much appreciated
blackmagic73
Frequent Poster
 
Posts: 73
Joined: 28 Feb 2008 1:55
Location: Mobile, AL