Page 1 of 1

Belt problems

PostPosted: 19 Nov 2010 10:40
by Adrian Worman
Hi mates, got any idea where I can get the right pt no for .my 440's March power steering serpentine belt, keep looking at March website but I can't find any belts listed there.
The cheap belts I used from Halfords shred as soon as I rev it out, i have a feeling that I don't have the right rear part of the power steering pump bracket tho', thats not going to help belt alignment. Its a Saginaw pump.
Looked on Summit as well and did a key word search, still nothing came up :!:

PostPosted: 20 Nov 2010 1:14
by jimbob 440
ade, find a car place that supplies GATES belts i,e cambelts are made by gates, micro v belts and normal v belts. they should have a tool to measure how long the belt is then they can match the to the nearest, thats how i did mine. a local place called (frenco service replacments)closest one i know to you would be in banbury, would never use halfrauds crap :thumbsup:

Re: Belt problems

PostPosted: 20 Nov 2010 8:58
by dave-r
Adrian Worman wrote:Hi mates, got any idea where I can get the right pt no for .my 440's March power steering serpentine belt, keep looking at March website but I can't find any belts listed there.
The cheap belts I used from Halfords shred as soon as I rev it out, i have a feeling that I don't have the right rear part of the power steering pump bracket tho', thats not going to help belt alignment. Its a Saginaw pump.
Looked on Summit as well and did a key word search, still nothing came up :!:


I have the belt part numbers somewhere but I am not at home this weekend. I am in the west midlands.

PostPosted: 20 Nov 2010 10:30
by Adrian Worman
No sweat Dave :) Found a Gates 6 rib belt at USAutomotive in Bedford, worked out at 965mm long if anybody wanted to know :thumbsup:
Ta Jim.......Halfrauds? well funny :lol: :lol: :lol:

PostPosted: 21 Nov 2010 11:34
by Adrian Worman
Got one :D
Ta for the tips, so for future reference if anybody is running a March serpentine 6 rib pulley kit with a Saginaw power steering pump on a 440 the belt cides are;
Gates K060380
Goodyear 4060380
Dayco 5060380

PostPosted: 22 Nov 2010 19:11
by dave-r
On my engine (no AC and no PS) I have a GoodYear 4060435.

I also found this paperwork from when I bought the kit many years ago.

PostPosted: 22 Nov 2010 19:33
by Adrian Worman
All the info I need, cheers Dave :D