Page 1 of 1

mopar disc brakes

PostPosted: 01 Nov 2008 13:23
by rookie
hi i need some info on mopar disc brakes? i have a 70 challenger with disc brakes in front. they are not original since its started out as an 318 car. i saw some marking on the caliper it was a mopar star and the following numbers: 777
23258

any one know what mopar theyr from??

thanks
rookie

PostPosted: 01 Nov 2008 18:07
by dave-r
Pretty sure you could get disc brakes on a 318 if you wanted to.
Option code B41.

PostPosted: 01 Nov 2008 18:16
by dave-r
Most Chrysler part numbers are 7 digits. That does not look like a Chrysler part number to me. However it could be a casting number which would be different.

PostPosted: 01 Nov 2008 20:05
by rookie
ok i will take your word on this one dave you know what you talking about. migh becasting number. must be chrysler since the penta star is stamped on there tough

PostPosted: 01 Nov 2008 20:45
by dave-r
If they are original 1970-72 Challenger calipers then they will be the K-H pin type on 10.75" two-piece rotors.