Front suspension torque settings?
Posted: 10 Jun 2008 16:47Would anyone be so kind as to provide me with the torques for the front suspension ('73, disc brakes)? I haven't yet got myself a shop manual for it. Thanks.
The Dodge Challenger Message Board
http://challenger.mpoli.fi/board/
Front suspension torque settings?
Page 1 of 1
Posted: 10 Jun 2008 16:47Posted: 11 Jun 2008 5:29If you can narrow that down for me, I could help. The brake's themselve's, suspension, torsion bar's, sway bar's?
Posted: 11 Jun 2008 20:26All of it, actually. I disassembled it all to derustify, clean and paint it, and now I'm working on reinstalling it. So I need torques for lower and upper ball joints, cam bolts, end links, lower control arm, brake mounting bracket, brake caliper bolts, sway bar, the nut on the end of the spindle. Whatever you can give me would be much appreciated.
Posted: 11 Jun 2008 20:34I will PM you the 1970 spec.
Posted: 12 Jun 2008 4:58There you go! 
Dave is very knowlegable on this, and, I believe the spec's are the same on the 70' and 73'. But, you really need that 73' Dodge, Body and Chassis, service manual. It very helpful, as well as interesting. With that, and this Board, I have all the Information needed to keep my car running strong. 
Good Luck, Pat
Dave is very knowlegable on this, and, I believe the spec's are the same on the 70' and 73'. But, you really need that 73' Dodge, Body and Chassis, service manual. It very helpful, as well as interesting. With that, and this Board, I have all the Information needed to keep my car running strong.
Good Luck, Pat