Front brake pipe route

Postby dave-r » 30 May 2007 18:22

I have forgotten the route the brake pipe takes from the engine side of the front frame rail to the outside to mate with the front brake hose. :?

It does not seem to want to go any way. :worry:

IMG_1192.jpg
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Re: Front brake pipe route

Postby fbernard » 31 May 2007 6:09

dave-r wrote:I have forgotten the route the brake pipe takes from the engine side of the front frame rail to the outside to mate with the front brake hose. :?


Under the frame rail, then it loops up and back down to the bracket. Yours seems too short.

I have thought about going through the access window, but it's impractical.
User avatar
fbernard
Frequent Poster
 
Posts: 733
Joined: 19 Oct 2003 20:41
Location: Paris, France

Postby dave-r » 31 May 2007 8:31

That was how I remembered it but as you say it seems short.

It must have shrunk in the wash because I have never removed it. :lol:

I will have another look. It might just need to be straightened out more as it has been bent about a bit.
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England

Postby dave-r » 31 May 2007 12:49

Ooops. :oops:

I looked under the car to see why the brake line will not reach.

The reason is that it is the line going to the rear brake. :oops: :oops:

Well in my defence it has been 3 years sice I took the thing apart. :roll:
User avatar
dave-r
Grumpy Old Man
 
Posts: 9842
Joined: 12 Oct 2003 21:45
Location: North of the Tyne, England