Page 1 of 1

Ignition Lock Replacement

PostPosted: 03 Oct 2004 18:46
by Todd71
Saw the message below on the ignition switch- so this may be a similar situation. I had the tumblers in my lock get jammed up (ugly story) and now have to replace the lock. I can get the key in but cannot turn it at all. My question is do I need to pull the column or can I pull the lock somehow?

PostPosted: 04 Oct 2004 12:19
by 71_DEPUTY
IF I remember correctly 20 years ago I had to remove the ing. cycl. too in the girl freinds Cuda- have to remove the steering wheel!!!!!

P.S. it's not that bad!! lol

PostPosted: 04 Oct 2004 12:37
by dave-r
I think you take the wheel off and then have to pull the 'coffee can' under it off (with a suitable or home made puller).

NEVER hammer anything on the steering column. It has many collapsable parts that will get damaged.

PostPosted: 04 Oct 2004 13:57
by dave-r
These should help.